Silego power splitter has 130V surge protection
- Auteur:Ella Cai
- Relâchez le:2017-06-22
Silego, the configurable mixed signal specialist, has brought out a single-input, dual-output power splitter with 130V surge protection.
It is designed for mid- and high-end smartphones and tablet PCs.
In these applications, system-level, over-voltage protection (OVP) has become a standard requirement.
Its OVP response time protects sensitive downstream components from possible damage. Even though designed to operate with 5V, 9V, or 12V power adapters, the SLG59H1302C does not suffer damage even if 20V power adapters are mistakenly used.
In applying Silego’s proprietary MOSFET design IP, the Company’s design engineers packaged two high-performance nFET transistors into a pcb-space-efficient 5 mm2 WLCSP footprint.
In fact, the SLG59H1302C’s VBUS-to-VOUT RDSON is claimed to be 47% smaller, and its VBUS-to-VSYS RDSON 31% smaller than existing solutions.
Because of these high-performance nFETs, the SLG59H1302C’s very low operating thermal gradients enable higher component packing density and ease system thermal design.
It is designed for mid- and high-end smartphones and tablet PCs.
In these applications, system-level, over-voltage protection (OVP) has become a standard requirement.
Its OVP response time protects sensitive downstream components from possible damage. Even though designed to operate with 5V, 9V, or 12V power adapters, the SLG59H1302C does not suffer damage even if 20V power adapters are mistakenly used.
In applying Silego’s proprietary MOSFET design IP, the Company’s design engineers packaged two high-performance nFET transistors into a pcb-space-efficient 5 mm2 WLCSP footprint.
In fact, the SLG59H1302C’s VBUS-to-VOUT RDSON is claimed to be 47% smaller, and its VBUS-to-VSYS RDSON 31% smaller than existing solutions.
Because of these high-performance nFETs, the SLG59H1302C’s very low operating thermal gradients enable higher component packing density and ease system thermal design.
