Связаться с нами
Компания: Отлично Интегрированная система с ограниченной
Контактное лицо: Элла Цай
Адрес: RM 2501 JIEJIA СТРОИТЕЛЬСТВО FUTIAN ШЭНЬЧЖЭНЬ 518031, Китай
E-mail: [email protected][email protected]
Skype: sales009-EIS
Телефон: 0086-755-23611101
Факс: 0086-755-61679009-109
Связаться с предприятием
Домой > Новости > Industry News > Small PC also supports Arduino

Small PC also supports Arduino

  • Автор:Ella Cai
  • Отпустите на:2017-08-01
LattePanda is an Intel Atom PC running and Arduino (Leonardo clone) combined.

Designed for Windows 10, it has a Z8300 quad-core 1.8GHz Cherry Trail CPU, 2-4Gbyte DRAM, 32-64Gbyte eMMC and interfaces including: Wi-Fi, Bluetooth 4.), HDMI and USB 3.0. 

I/O is handled by the Leonardo’s ATmega32u4 processor rather than the Atom. 
“This micro controller is re-programmable, source code is provided, and can be programmed to off-load the Atom if an application is so demanding,” said RS Components, which is stocking the 2Gbyte/32Gbyte version. 

RS Components LattePanda up closeIt comes in two versions – with or without a Windows licence. “The licensed version offers better value for money than an unlicensed plus separate licence,” said RS. 

Arduino co-processor
“Anyone who has tried to use a Linux/Windows system for real-time/deterministic operation will tell you it doesn’t work well,” said RS. “Linux or Windows is based around scheduling and when we ask for a GPIO to go high it schedules this event. When it happens depends on a number of factors adding up to ‘some time later’.” 

LattePanda pin-outU1 is X-Z8300 core I/O. 

U2 is ATmega32u4 I/O.
U2 digital I/O pins (A0-5, D0-13) are 5V 40mA with switchable 20-50kΩ pull-up 

The Arduino has analogue inputs and hardware blocks including I2C and timers. “Using a hardware I2C device means more reliable operation as the software is no longer having to poll the I/O and the hardware will do all of the hard work,” said RS. 

The Arduino comes pre-programmed with the Firmata sketch for PC Operation, which provides an interface to the Arduino hardware via a serial port for controlling the GPIO and peripherals. 

Some extras
Acrylic case & fan  (126-3112)
TFT LCD   (126-3116)
Sensor kit  (126-3114)
And RS points to this printable stand.